Logo
Home
Hot Melt
SURE-MELT® Hot Melt Waterproofing System from CARLISLE®

SURE-MELT® Bituminous Waterproofing System

SURE-MELT® is a monolithic hot melt waterproofing system that provides robust, hard-wearing protection for your roof.

SURE-MELT® is currently available in the UK only.

SURE-MELT® Bituminous Waterproofing System

SURE-MELT® - Waterproofing with Surety

SURE-MELT® is a robust bituminous system with the following advantages:

Triple protection:

SURE-MELT®️ features a three-layer system to include double layers of bituminous membrane reinforced with a layer of fleece and a protection sheet for unbeatable robustness and durability. Protection sheets offer a choice of torch-on, sand faced and root resistant membranes.

Weatherproofing:

An effective waterproofing system, SURE-MELT®, protects against water ingress and prevents any water from tracking beneath the membrane.

Properties in relation to fire:

SURE-MELT® can enable a BroofT4 specification that is unrestricted under national building regulations, when used in protected or inverted roof specifications, including an inorganic covering.

Wind uplift resistance:

The system bonds fully to the substrate and is not susceptible to wind uplift.

Damage resistance:

While reasonable care should be taken to avoid unnecessary puncturing from sharp objects or loading, SURE-MELT® is a self-healing bituminous waterproofing system resistant to damage from normal foot traffic and light loading during construction and operational phases.

Low maintenance:

SURE-MELT®️ requires minimal maintenance for long-term performance. Thanks to its self-healing properties, the system is robust enough to withstand point loads, abrasion and wear and tear during the construction phase. The roof should be inspected regularly and maintained per BS 6229:2018 but it is designed to provide a 30+ year low maintenance service life.

Order your free SURE-MELT® info pack

SURE-MELT® Product Range

Below is the SURE-MELT® system range. Explore the range to for your project:

SURE-MELT® Bituminous Waterproofing Compound

The polymer-modified bitumen compound is hot applied in two layers to provide a hardwearing, seamless waterproofing membrane with a thickness of minimum 6mm and permanent adhesion to the substrate. The system offers a durable watertight layer for inverted, buried, biophilic green roofs, balconies and podium decks.

Available in 14 Kg blocks, packaged in dispersible film.

Image
Image

SURE-MELT® Primer

SURE-MELT® Primer is specially developed for use with the SURE-MELT® bituminous waterproofing membrane. It's a quick drying bituminous primer applied to the substrate with a roller or a brush before the SURE-MELT® bitumen pour

Available in 5 L and 25 L cans.

SURE-MELT® Reinforcement Fleece

A high-strength polyester spun bond thermally-bonded fleece with a point-embossed surface. It is a key component within the SURE-MELT® bituminous waterproofing system, acting as a reinforcement layer between the two layers. Additionally, the point-embossed surface helps to provide increased friction between the layers of the membrane.

Available in a 1M wide x 200M length roll

Image
Image

SURE-MELT® CPS

Sand Faced Protection Sheet

The SURE-MELT® CPS protection sheet has been developed specifically for use with the SURE-MELT® bituminous layers, providing heavy-duty protection from solar degradation and loading.

A high-performance, polymer-modified bitumen, sand-faced protection sheet, available as a 2kg and 4kg membrane.

The protection sheet is rolled into the warm SURE-MELT® membrane, adhering to the liquid bitumen. The topside and underside of the protection sheet have a sand finish.

2 Kg available in 1M x 16M roll and 4 Kg is avaialble in 1M x 8M roll.

SURE-MELT® CPT

Torch-On Protection Sheet

The SURE-MELT® CPT protection sheet has been developed specifically for use with the SURE-MELT® bituminous layers, providing heavy-duty protection for the system from solar degradation and loading.

The protection sheet is torch applied to the SURE-MELT® membrane, adhering to the liquid bitumen. The underside of the protection sheet has a heat-sensitive film which rapidly melts during the torch-on installation. The film also prevents the roll from sticking together in storage.

SURE-MELT® CPT which is available in 2kg and 4kg weights.

2Kg comes in a 1M x 16M roll and 4Kg comes in a 1M x 8M roll.

Image
Image

SURE-MELT® CPM-5

Root Resistant Protection Sheet

A root-resistant 5 kg protection sheet containing a chemical root retardant and a polyester reinforcement carrier. It has a charcoal slate mineral finish that acts as an additional barrier to prevent root ingress. The chemical additive is specifically designed for the SURE-MELT® bituminous waterproofing system, making it ideal for use under living roofs, podium gardens and other landscaped areas.

SURE-MELT® Advantage

Robust Waterproofing

Cost Effective System

Root Resistant

Low Maintenance

Monolithic

Compatible System

Technical Information

Properties -SURE-MELT® Bituminous CompoundValue
Unit size14Kg dispersible film covered blocks
Approx.coverage (2no. layer @ 3mm per application)6Kg/m²
Normal laid thickness6 mm
Softening point55-85 deg C
Penetration 45-75 mm
Low temp. flex BS EN ISO 1109:2000-PASS
Flow resistance <3mm
Need further help?
Get in touch
We are here to help
Are you looking for an expert advise and/or more information?