Logo
Home
Adhesive
HERTALAN® KS 96 Adhesive Sealant

HERTALAN® KS 96 Adhesive Sealant

A high quality MS Polymer adhesive sealant specially developed for adhering HERTALAN® EPDM membranes and accessories both vertically and horizontally to timber, bitumen, concrete, EPDM, metalwork and membrane jointing.

One component, an odourless adhesive and sealant durably bonds HERTALAN® EPDM membranes to one another. The adhesion is elastic and waterproof. After complete curing, a temperature resistance of -40 °C to +100 °C is achieved. HERTALAN® KS 96 is used to finish the glued seam on the outer edge of the membrane. For further information or any specific substrate adhesion please contact our technical department.

Properties and Installation

Installation of KS96 must take place in dry weather and at a minimum temperature of +5°C. The surfaces to be bonded must be dry, frost-free and clean. In the case of glued seams (HERTALAN® KS 137), a 20 mm wide zone is sealed with HERTALAN® KS 96 at the edge. To do this, the adhesive is applied to one side and then the seam is rolled on with a silicone pressure roller. Watch out for a bead of adhesive about 1 mm wide

  • High quality adhesive and sealant

  • Permanently elastic

  • Fast curing - Instant Waterproofing

  • Suitable for adhesion to verticals and horizontal surfaces.

  • Available in 290ml cartridges and 600ml foil pouches.

  • Can be used on wood, bitumen, concrete, metal and masonry

  • 600ml: Coverage approx. 15 linear metres

  • 290ml: Coverage approx. 7 linear metres

Technical Data

Property Value
Type of productMS Polymer based adhesive and sealant
AppearanceBlack
Smell Odourless
Shrinkage None
Density (20° C)1.415 kg/m³
Curing (in 24 hours) 2 mm
Maximum Elasticity 300 % (DIN 53504)
Shelf life 12 months, provided that the adhesive is kept in the original unopened can
Packaging 290 ml cartridge, 600 ml sausage, 200ml Pressure Pack